Herunterladen Inhalt Inhalt Diese Seite drucken

Operation; Turning On The Appliance - Kärcher HDS 551 C Eco Betriebsanleitung

Vorschau ausblenden Andere Handbücher für HDS 551 C Eco:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1

Operation

Danger
Long hours of using the appliance can cause
circulation problems in the hands on account
of vibrations.
It is not possible to specify a generally valid
operation time, since this depends on sever-
al factors:
– Proneness to blood circulation deficien-
cies (cold, numb fingers).
– Low ambient temperature. Wear warm
gloves to protect hands.
– A firm grip impedes blood circulation.
– Continuous operation is worse than an
operation interrupted by pauses.
In case of regular, long-term operation of the
device and in case of repeated occurrence
of the symptoms (e.g. cold, numb fingers)
please consult a physician.
Warning
Never operate device with empty fuel tank
The fuel pump will otherwise be destroyed

Turning on the Appliance

Figure 2
Set the appliance switch (1) to "I".
Indicator lamp ready status (4) glows.
Note
If the indicator lamps (2), (3) or (6) are light-
ing up during operation, turn off device im-
mediately and repair malfunction, refer to
malfunctions.
The device starts briefly and turns off, as
soon as the working pressure is reached.
Figure 5
Release the hand spray gun (A).
When activating the hand spray gun the de-
vice switches back on.
Note
If no water comes out of the high pressure
nozzle, vent pump. Refer to malfunctions
"Device is not building up pressure".
Adjust cleaning temperature.
Set device switch to desired tempera-
ture.
30 °C to 90 °C
– Clean with hot water.
100 °C to 150 °C
– Clean with steam (with steam nozzle
4.766-023, only HDS 558.../601.../698.../
798...only).
Set working pressure and flow rate
Only HDS 558.../601.../698.../798...
Servo pressure regulation:
Set device switch to max. 98 °C.
Figure 6
Set regulating spindle to maximum work-
ing pressure.
Figure 5
– Set working pressure and flow rate
through turning (directly) at the pressure-
and amount regulation (B) of the hand-
gun (+/-).
Note
For long term work with low pressure, set
pressure at device.
See Figure 6.
Operation with detergent
– For considerate treatment of the environ-
ment use detergent economically.
– The detergent must be suitable for the
surface to be cleaned.
29
English

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis