Special Programs - Bosch Sensixx DS38i-Temp Gebrauchsanleitung

Temperature
●
●●
●●●
max
Tips:
• Sort your garments out based on their cleaning
symbol labels, always starting with clothes that
have to be ironed at the lowest temperatures.
• For mixed fabrics, select the temperature
corresponding to the most delicate fabric.
• If you are not sure what the garment is made
of then begin ironing at a low temperature and
decide on the correct temperature by ironing a
small section not usually seen when worn
• At the beginning of each use, it is possible that
drops of water will be dispensed alongside
steam.
Therefore, it is advisable to try the iron on the
ironing board or a piece of cloth to start with.
• For better ironing results, iron the last strokes
without steam to dry the garment.
** The wool cycle of this iron has been
approved by The Woolmark Company for the
ironing of pure wool products provided that
the products are ironed according to the
instructions on the garment label and those
issued by the manufacturer of this iron. R1502.
In UK, Eire, Hong Kong and India the Woolmark
trade mark is a certification trade mark.

3. Special programs

3.1 "i-Temp Advanced" programme

See the leaflet sides
This steam station has an "i-Temp Advanced"
programme. If this programme is selected, an
appropriate combination of temperature and steam
is set, which is suitable for all fabrics that can be
ironed.
The "i-Temp Advanced" programme prevents
clothes from being damaged due to an unsuitable
temperature being selected.
The "i-Temp Advanced" programme does not
apply to fabrics that cannot be ironed. Please
check the garment care label for details or try
ironing on a part of the cloth not visible normally.
18
B O SC H
Programme
Synthetics
Wool**
Cotton / Jeans
Linen
3.2 "AntiShine" programme*

See the leaflet sides
This steam station has an "AntiShine" programme.
If this programme is selected and the steam
release button (14 or 15*) is regularly pressed, the
risk of shiny marks on the garment due to the
ironing is reduced.
3.3 "Hygiene" programme*
This steam station is equipped with a special
"Hygiene" programme.
The innovative hygienic steam technology
removes 99.9% of microbes. Suitable for all kinds
of fabrics and extremely efficient in both thick and
delicate garments. The unique combination of
temperature and interval steam provides a
sanitizing effect requiring no chemical additives.
Please proceed as follows:
1. Choose the "Hygiene" programme by turning
the selector (9).
2. Place the iron on the garment or fabric you want
to disinfect.
3. Press continuously the steam release button
(14) on the bottom of the handle to release
powerful shots of hygienic steam. Slowly iron
the whole garment to enhance the final result.
Notes:
• To ensure the high efficiency of the Hygiene
programme, the system has to be reset after
20 minutes. "Hygiene" indicator lamp blinks
five times and the steam generator switches
automatically to the "i-Temp Advanced"
programme.
• If desired to continue in the "Hygiene"
programme, please wait till the Program-LED
of the "i-Temp Advanced" programme stops
blinking followed by two beeps. After that, you
can choose again the "Hygiene"-programme by
turning the selector (9).
• Energy saving setting
while the "Hygiene" programme is selected.
3.4 "Calc'nClean" programme
See section 11.
cannot be activated
* Model dependent