Technical Data - ATIKA PTK 250 S Originalbetriebsanleitung

Fault
Machine stops while cutting
Workpiece sticks when feeding
Burned spots at the cut areas
Chip outlet is clogged
Saw vibrates
Cut not perpendicular
Model
Year of constructions
Motor input P
1
Mains voltage
Mains frequency
Protection class
Saw blade speed
Mains fuse
Hard metal saw blade Ø maximum
Hard metal saw blade Ø minimum
Saw blade thickness
Cut width
Number of teeth
Thickness of riving knife
Saw blade location hole
Cutting speed (at maximum saw blade Ø)
Cutting height at 90° (for maximum saw blade Ø)
Cutting height at 45° (for maximum saw blade Ø)
Bevel cut adjustment
Saw table size:
Table size (with width extension)
Table height (with stand)
Weight (with stand)
exhaust outlet saw guard Ø
Exhaust connection Ø
Commercial small dust removers or industrial vacuum cleaners can be used for exhaustion.
Possible cause
• Saw blade blunt
• Feed is too great
• Motor protecting switch has tripped
• Saw blade is dull
• Saw blade is not suitable for the work step or
is dull
• No exhaust system connected
• Exhaust power too weak
• Saw blade is warped
• Saw blade not properly mounted
• Angle end stops not accurately adjusted
T e c h
T e c h
Removal
• Replace saw blade
• Allow motor to cool and proceed working
with less pressure
• Switch motor back on after cooling ("Motor
protection", page 19)
• Hold the workpiece firmly and switch the
motor off immediately. The have the saw
blade sharpened or renew
• Replace saw blade or have it sharpened
• Switch off saw, remove chips and connect
exhaust system
• Switch off saw, remove chips and increase
exhaust power (air velocity 20 m/sec at chip
exhaust neck).
• Replace saw blade
• Mount saw blade properly
• Align the saw blade in 90° and 45° exactly
right-angled to the saw table (see "45° and
90° fine adjustment")
n i c a l d a t a
n i c a l d a t a
PTK 250 S
see last page
1800 W S1
230 V~
50 Hz
II (double insulated)
5000 min
-1
16 A
250 mm
245 mm
1.8 mm
3.0 mm
40
2 mm
30 mm
65.4 /
m
s
ca. 0 - 74 mm
ca. 54 mm
0° – 45°
630 x 510 mm
630 x 760 mm
920 mm
ca. 23 kg
32 mm
39 mm
23