Specifications - Makita VC3211H Betriebsanleitung

ENGLISH (Original instructions)
1. Suction force adjusting knob
2. Hose diameter selection dial
3. Switch lever
4. Outlet cap
5. Power supply cord
6. Hose band
7. Base hook

SPECIFICATIONS

Voltage
Power consumption
Connected load for appliance
socket
Total connected load
Volume flow (air)
Recoverable capacity
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
... Read instruction manual.
................. Take particular care and attention.
................ Warning! The cleaner may contain
hazardous dust.
................ Never stand on the cleaner.
.................. The cleaners are capable of picking up
dust class L, M and H. Follow your
county's regulations relating to dusts and
to occupational health and safety.
Warning! This machine contains dust
hazardous to health. Emptying and
maintenance operations, including
removal of the dust collection means,
6
Explanation of general view
8. Front cuffs
9. Hose
10. FREE position
11. LOCK position
12. Stopper lever
13. Caster
14. Filter bag
Model
Countries
Volt
Watt
Watt at symbol mode
Watt at symbol mode
Watt
Model
With 28 mm X 3.5 m hose
With 38 mm X 2.5 m hose
Vacuum
Type of protection
Dimensions (L x W x H)
Net weight
Safety class
END114-1
15. Cap
16. Powder filter
17. Damper
18. Prefilter
19. Level sensors
20. Multi-hook
EU Switzerland
230-240 230-240
1,050 1,050
2,400 1,100
2,600 1,400
3,450 2,150
Dust
Water
must only be carried out by authorised
personnel wearing suitable personal
protection. Do not operate without the full
filtration system fitted.
................ Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of the European Directive,
on Waste Electric and Electronic
Equipment and its implementation in
accordance with national law, electric
equipment that have reached the end of
their life must be collected separately and
returned to an environmentally
compatible recycling facility.
Intended use
The tool is intended for collecting both wet and dry dust.
The tool is suitable for commercial use, for example in
hotels, schools, hospitals, factories, shops, offices and
rental businesses.
VC3211H
UK
110 230-240
1,050
600
850
1,650
VC3211H
3
2.0 m /min.
3
3.5 m /min.
22 kPa
IP X4 (splash-proof)
32 L
27 L
552 mm x 398 mm x 685 mm
17.0 kg
Class I
1,050
1,900
2,100
2,950
ENE084-1