switel COIP 150 Schnellstartanleitung Seite 38

Adding mode by scanning the QR code
1. Power camera on > Press SET for 1 second > Click Add by scanning the QR code
to add the camera > Scan device ID > Enter the name and password for access to
WiFi. Perform operations as instructed.(Figure 8 series).
(Fig.8 series)
2. Point camera to the two-dimension code page on cell phone at a distance of about
15~20cm (as shown in Figure 9). If the red light is steady on, scanning succeeds,
and then click on "I heard it" to finish device binding operations.
(Fig. 9)
Share camera with friends
As the owner, you can allow your friends to access the camera. The "U-life Plus" app
must also be installed on their smartphones.
1. Open the Settings menu in the Monitoring view (
friends" (Fig. 10a).
2. The QR code shown there must be scanned by your friend during installation. If it
is not possible to scan directly from the display of your smartphone, you can, for
example, send a screenshot or print on paper from which your friend can scan the
QR code.
36
), and then tap "Share with