RIKA LOOK Montageanleitung Seite 22

15. WOODEN BENCH
Delivered Parts E15673
4x Z36329 Spacer
4x Z36331 Threaded sleeve
4x N111843 Washer
4x N112214 Hexagonal bolt
4x Z33581 Felt glider
Mounting
Set the wooden bench as desired. The holes are symmetrical, you can turn
around the bench and set the seat part right.
First, plug the plinth panel, then the 4 spacers on the preassembled screws on
the stove.
Fasten the parts with the enclosed threaded sleeves.
1x Z36330 Plinth panel
1x L02768 Heat shield
1x B17640 Wooden bench
1x Z36327 Glass plate
1x Z36328 Fire iron quiver
1x Z36325 Fire irons
Lay the heat shield on the wooden bench, hole on hole.
Now unscrew the transportation construction.
Note
Warning, the stove is no longer secured against tipping!
Set the stove careful to the bench with the threaded sleeves into the holes.
Note
Please pay particular attention to your fingers! Risk of injury!
Screw the hexagonal bolts and washers from the bottom into the threaded
sleeves. The stove is now secured.
Insert the glass plate in the lower shelf to protect the wooden surface. Put the
quiver for the fire irons into the provided hole.
#8
#13