RIKA LOOK Montageanleitung Seite 20

12. STEEL AND CAST CASE LEGS
Delivered Parts
E15668 Steel case leg
4x B17637 Steel case leg
4x L02763 Insert plate
4x N111843 Washer
4x N108656 Hexagonal nut
4x Z33581 Felt glider
E 15669 Cast case leg
4x Z36216 Cast iron foot
4x L02763 Insert plate
4x N105049 Washer
4x N108656 Hexagonal nut
4x Z33581 Felt glider
Mounting
(exemplified with steel casse leg)
Attach the steel case leg and the insert plate with the nut and washer.
If you do not yet fully tighten the nut, you can insert the insert plate between
stove and steel case leg.
Tighten the nut firmly.
Attach all 4 legs in this way with the insert plates (positions as shown below),
washers and nuts.
Now unscrew the transportation construction.
Note
Warning, the stove is no longer secured against tipping!
Lift down the stove with the assembled case legs from transport construction
and set it to the desired position.
#13
# 13
#8