RIKA LOOK Montageanleitung Seite 21

13. CONCRETE BASE
Delivered Parts E15671
1x Z36323 Concrete base
4x Z36324 Threaded sleeve
4x Z33581 Felt glider
Mounting
Set the concrete base to the final position in the installation room. The recess
on the top has to be at the right back.
Screw the threaded sleeves on the pre-mounted screws of the stove.
Now unscrew the transportation construction.
Note
Warning, the stove is no longer secured against tipping!
Set the stove carefully on the concrete base that the threaded sleeves engage
in the holes.
Note
Please pay particular attention to your fingers! Risk of injury!
14. STEEL BASE
Delivered Parts E15670
Mounting
Set the steel base to the final position in the installation room. The recess on
the top has to be at the right back.
Now unscrew the transportation construction.
Note
Warning, the stove is no longer secured against tipping!
Set the stove carefully onto the steel base that the screws engage into the
holes.
Note
#8
Please pay particular attention to your fingers! Risk of injury!
Secure the stove to the steel base with the washers and nuts.
1x B17638 Steel base
4x N105049 Washer
4x N108656 Hexagonal nut
4x Z33581 Felt glider
# 8
# 13
|21
20