Audio; Identification Number; Test Flash; Slow Charge - Hensel TRIA 3000 AS Bedienungsanleitung

5:

AUDIO

19:
ID
10:
TEST
12:
SLOW
17:
REMOTE
16
HENSEL-VISIT GmbH & Co. KG
Audio
Readiness to flash after charging is signaled with a tone. This
tone can be turned on (control LED lights up) or off using the
AUDIO switch 5. The pitch is related to the ID number.
Therefore you can get a 'melody' by setting different ID
numbers.

Identification number

By pressing push-button 19 an identification number (0 ...9)
can be selected for each power pack. The ID number is
displayed left to the button.

Test flash

By pressing button 10 test flashes can be released.
SIow charge
To enable operation of high-powered power packs in mains
networks with low load, the power pack can be charged with a
longer charging time. This is turned on using switch 12
(control LED lights up).
When charged for the first time, the power pack switches
automatically to slow charge for 10 sec. This is of benefit
when the unit has not been used for a longer period of time.
Thus, the capacitors can be loaded and better formatted
during initial charging and prevent the blowing of weak main
fuses.

Remote socket

The remote socket 17 is designed for controlling the TRIA AS
power pack by a computer. For doing this, special software is
required.

Trouble shooting

Er 01 - Er 15
Those error messages appear when one or more heads have
not triggered. For reset press the corresponding lamp control
switch 16.
User manual // TRIA AS Power Pack
41