Plugmatic; Lamp Switches On/Off; Operation; Switching On And Off - Hensel TRIA 3000 AS Bedienungsanleitung

User manual // TRIA AS Power Pack
15
16
7
ON / OFF
1:
SYNC
36

Plugmatic

The flash sockets 15 are fitted with the Hensel safety system
„Plugmatic". This enables unplugging and replugging of the
flash plugs without danger. Only after the plug has been
completely inserted, the triggering voltage is present by micro
switch.
Still, plugs should only be unplugged or plugged in when
the power pack is turned off.
Lamp switches ON / OFF
After connecting lamp plugs the corresponding lamp control
switches 16 must be turned on for operation. This is indicated
by the yellow light of the control LED.

Operation

Switching ON and OFF

By pressing the main switch (laterally) the power pack will be
turned on and off, respectively.
Synchronization (Flash triggering)
Synchronization by cable
 Via the synchronization socket 1 the power pack is
connected to the camera using a synchronization cable
with 6,3 mm phone jack.
 Several power packs can be connected in series by
means of the second synchronization socket 1.
The synchronization circuit is made up of state-of-the-art semi
conductor technology and enables secure triggering of the
flash, even with older cameras with mechanical contacts.
Due to the many different electronical circuits in cameras for
controlling synchronization, we cannot take any liability for
possible damage to cameras triggering flashes. Please con-
tact the camera manufacturer before using an unusual
camera.
HENSEL-VISIT GmbH & Co. KG