Herunterladen Inhalt Inhalt Diese Seite drucken

K8-Esb Product Manual Section; Rear Panel Description; Front Panel Description - Klein + Hummel K8-AI8 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

K8-ESB Product Manual Section

Rear Panel Description

Max. Power Consumption 20Watts
AC IN: 100-240V AC, 50-60Hz
RS 485
RS 485
RS 485
RS 485
Remote control connector for PC or external control system connection.
CONFIG
CONFIG
CONFIG
CONFIG
The first three DIP switch positions are used to terminate the device when only one
of the two output ports are being used. The device is terminated when the switch is
set to ON. Switches 1,2, 3 must be set the same way, either to ON or OFF!
The 4
16 channels.
K8 OUT 1 and 2
K8 OUT
K8 OUT
K8 OUT
1 and 2
1 and 2
1 and 2
K8 digital audio bus outputs. Each one contains the same audio and control data and
each one is capable of driving a 200 meter line. When only one output is used the
termination switch must be set to ON.
Sync LED
Sync LED
The Sync light glows when an EtherSound network is connected and locked.
Sync LED
Sync LED
Wink LED
Wink LED
Wink LED
Wink LED
Light blinks when turned on by remote control software. This light may be used to
confirm that a device is being remote controlled.
EtherSound IN
EtherSound IN
EtherSound IN
EtherSound IN
Used to connect to an upstream device of an EtherSound network according the
EtherSound standards.
EtherSound OUT
EtherSound OUT
Used to connect to a downstream device of an EtherSound network according the
EtherSound OUT
EtherSound OUT
EtherSound standards.
EtherSound Link LED Indicates that a valid EtherSound device is connected to the K8-ESB and is
EtherSound Link LED
EtherSound Link LED
EtherSound Link LED
synchronized.
EtherSound Activity
EtherSound Activity Indicates communication activity to the connected EtherSound device.
EtherSound Activity
EtherSound Activity
LED
LED
LED
LED

Front Panel Description

POWER
Power LED
Power LED
Power LED
Power LED
The Power LED is illuminated when the device is plugged in and the rear power
switch is turned on.
Page 20
RS 485
1
K8 OUT
CONFIG
S
W
Made in Germany
K8
K8- - - - ESB Rear Panel
K8
K8
ESB Rear Panel
ESB Rear Panel
ESB Rear Panel
th
DIP switch selects between 8 and 16 channel mode. ON is 8 channels. OFF is
K8 DIGITAL AUDIO DISTRIBUTION
K8
K8- - - - ESB Front Panel
ESB Front Panel
K8
K8
ESB Front Panel
ESB Front Panel
EtherSound Network
2
IN
ETHERSOUND BREAKOUT
K8- ESB
OUT
Link
Activity
K8 Rackmount Family User Manual

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

K8-ao2K8-ao8K8-esb

Inhaltsverzeichnis