K8-Ao2 Product Manual Section; Rear Panel Description; Front Panel Description - Klein + Hummel K8-AI8 Bedienungsanleitung

K8-AO2 Product Manual Section

Rear Panel Description

Max. Power Consumption 10Watts
AC IN: 100-240V AC, 50-60Hz
Output 1- - - - 2 2 2 2 Output 1 Balanced analogue audio line outputs, unbalanced line outputs on RCA cinch.
Output 1 Output 1
RS 485 RS 485 RS 485 RS 485 Remote control connector for PC or external control system connection.
TERM TERM DIP switch is used to terminate the device when only one of the two output ports are
TERM TERM
being used. The device is terminated when the switch is set to ON. All switches must
be set the same way, either to ON or OFF!
K8 Input K8 Input K8 Input K8 Input The K8 signal feed input to the device.
K8 Link K8 Link A passive loop through connection of the K8 Input for connecting the next device in
K8 Link K8 Link
the chain.
Sync LED Sync LED Sync LED Sync LED The Sync light glows when a K8 Input is connected and locked to the signal coming
from a K8 Input device.
Win Wink LED Win Win k LED k LED k LED Light blinks when turned on by remote control software. This light may be used to
confirm that a device is being remote controlled.

Front Panel Description

OUTPUT 1
POWER
Power LED Power LED Power LED Power LED The Power LED is illuminated when the device is plugged in and the rear power
switch is turned on.
Output LEDs Output LEDs Output LEDs Output LEDs The red, yellow and green channel Output LEDs show the Output signal level for each
channel at the output connector downstream of the software level trim.
Page 16
RS 485
K8 INPUT K8 LINK
TERM
S
W
Made in Germany
K8 K8 K8- - - - AO2 Rear Panel K8 AO2 Rear Panel AO2 Rear Panel AO2 Rear Panel
2
K8 DIGITAL AUDIO DISTRIBUTION
+12 +12
ANALOGUE LINE OUTPUT
0 0
-20 -20
K8- - - - AO2 Front Panel K8 K8 K8 AO2 Front Panel AO2 Front Panel AO2 Front Panel
OUTPUT 1 OUTPUT 2
OUT 2
K8- AO2
K8 Rackmount Family User Manual
OUT 2