Use Of Dishwasher Salt - IKEA RENLIG DW45 Bedienungsanleitung

ENGLISH
2. Make sure that the appliance is in setting
mode.
3. Press and hold the programme selection/
cancel button.
4. Release the programme selection/cancel
button when programme indicator light A
starts to flash and programme indicator
light B comes on.
5. Wait until programme indicator light B
goes off.
– Programme indicator light A starts to
flash.
– The end indicator light starts to flash.

Use of dishwasher salt

Caution! Only use dishwashers salt.
Types of salt that are not applicable for
dishwashers cause damage to the water
softener.
1
3
Fill the salt container
with 1 litre of water
(only the first opera-
tion).
2
4
Fill the salt container
with 1,5-1,7 kg of
salt. Use the salt fun-
nel supplied.
6. Press the programme selection/cancel
button one time.
– Programme indicator light A starts to
flash.
– The setting function of the water soften-
er is activated.
– The end indicator light flashes to show
the level of the water softener.
Example: 5 flashes, pause, 5 flashes,
pause, etc... = level 5.
7. Press the programme selection/cancel
button one time to increase the water
softener level by one step.
8. Press the on/off button to save the oper-
ation.
5
Make sure that there
is no grain of salt
outer of the salt
compartment.
It is normal that water overflows from
the salt container when you fill it with
salt.
10
6