Use Of Dishwasher Salt - IKEA LAGAN Bedienungsanleitung

ENGLISH
Electronic adjustment
The water softener is set at the factory at
level 5.
1. Press and hold the start/cancel button.
Turn the programme knob clockwise until
the programme marker agrees with the
first washing programme on the control
panel.
2. Release the start/cancel button when the
on/off indicator light and the start/cancel
indicator light start to flash.
– At the same time, the end indicator light
flashes to show the level of the water
softener.

Use of dishwasher salt

Caution! Only use dishwashers salt.
Types of salt that are not applicable for
dishwashers cause damage to the water
softener.
1
3
Fill the salt container
with 1 litre of water
(only the first opera-
tion).
2
4
Fill the salt container
with 1,5-2,0 kg of
salt. Use the salt fun-
nel supplied.
Example:
5 flashes, pause, 5 flashes, pause, etc...
= level 5
3. Press the start/cancel button one time to
increase the water softener level by one
step.
The end indicator light shows the new level.
4. Turn the programme knob to the off posi-
tion to save the operation.
5
Make sure that there
is no grain of salt out-
er of the salt com-
partment.
It is normal that water overflows from the
salt container when you fill it with salt.
6
9