Electrolux EUFG28810X Benutzerinformation Seite 15

Removing the transport support
Your appliance is equipped with transport
support to secure the door during transpor-
tation.
To remove them do these steps:
1. Open the door.
2. Remove the transport support from the
door sides.
3. Remove the transport support from the
lower hinge (some models).
Important! Some models are fitted with a
silencing pad under the cabinet. Do not
remove this pad.
3
Rear spacers
Install the spacers provided within the ac-
cessory bag as shown in the figure.
When two appliances are placed beside
each other, attach the adhesive spacers be-
tween the appliances.
Install two spacers on the back side of the
panel and two spacers with adhesive on
the lower part.
2
Connecting the water hose.
Water supply should be provided with a tap
and 3/4" male connector within 1,5 m from
the appliance.
This work is to be carried out by a skilled
plumber.
There are different type-approved taps and
tap assemblies on the market.
The water hose must not be cracked,
squeezed or put in tight bends.
Before the appliance is placed its final loca-
tion, ensure that the water connection has
electrolux 15