Care And Cleaning; Cleaning The Filters; Cleaning The Spray Arms - Electrolux ESL 6810RA Benutzerinformation

34 www.electrolux.com
• The position of the items in the baskets
is correct.
• The programme is applicable for the
type of load and for the degree of soil.
• The correct quantity of detergent is
used.

9. CARE AND CLEANING

WARNING!
Before maintenance, deactivate
the appliance and disconnect the
mains plug from the mains socket.

9.1 Cleaning the filters

C
B

9.2 Cleaning the spray arms

Do not remove the spray arms.
• There is dishwasher salt and rinse aid
(unless you use combi detergent tab-
lets).
• The cap of the salt container is tight.
1. Turn the filter (A) counterclockwise
and remove it.
C
A
2. To disassemble the filter (A), pull
apart (A1) and (A2).
3. Remove the filter (B).
A1
4. Wash the filters with water.
5. Put the filter (B) to its initial position.
Make sure that it assembles correctly
A2
under the two guides (C).
6.
Assemble the filter (A) and put it into
position in filter (B). Turn it clockwise
until it locks.
If the holes in the spray arms are clogged,
remove remaining parts of soil with a thin
pointed object.
Dirty filters and clogged spray
arms decrease the washing re-
sults.
Make a check regularly and, if
necessary, clean them.
An incorrect position of the filters
can cause bad washing results
and damage to the appliance.