Wiring Connection - Kenwood DPX-3000U Bedienanleitung

Wiring connection

Front/ Rear/subwoofer output
Connecting the ISO connectors on some VW/Audi or
Opel (Vauxhall) automobiles
You may need to modify the wiring of the supplied
wiring harness as illustrated below.
A7 (Red)
Vehicle
A4 (Yellow)
Default wiring
Pin Color and function
A4 Yellow : Battery
A5 Blue/White : Power control
A7 Red : Ignition (ACC)
A8 Black : Earth (ground) connection
Purple ]
B1
: Rear speaker (right)
Purple/black [
B2
Gray ]
B3
: Front speaker (right)
B4 Gray/black [
B5 White ]
: Front speaker (left)
White/black [
B6
Green ]
B7
: Rear speaker (left)
Green/black [
B8
Antenna terminal
Ignition wire
(Red)
Unit
Battery wire
(Yellow)
Fuse (10 A)
If no connections are made, do not let the wire come out from the tab.
Yellow (Battery wire)
Light blue/yellow
Red (Ignition wire)
(Steering remote control
wire)
Red (A7)
Blue/White
(Power control wire/
Antenna control wire)
Yellow (A4)
Brown
(Mute control wire)
ISO connectors
If your car does not have an ISO terminal :
We recommend installing the unit with a
commercially available custom wiring harness
specific for your car and leave this job to professionals
for your safety. Consult your car audio dealer.
When connecting to an external amplifier, connect
its ground wire to the car's chassis to avoid damaging
the unit.
STEERING WHEEL
REMOTE INPUT
To the steering wheel remote control
REMOTE CONT
adapter
To the power control terminal when
ANT CONT
using the optional power amplifier
or to the antenna control terminal in
P. CONT
the vehicle
To the terminal that is grounded
when the telephone rings or during
conversation ( 13)
MUTE
(To connect the Kenwood navigation
system, refer your navigations
manual.)
ENGLISH
17