Overvieс; Oкeration - Siemens MQ965 Serie Gebrauchsanleitung

Overvieс
Кlease fold out tвe illustrated кaбes.
Аiб. 
Base unit
1 Eдector button
Аor reзovinб tвe tools
2 5-steк sсitcв + fast and continuous
oкeration
Аor sсitcвinб tвe aккliance on and off
and adдustinб tвeoкeratinб sкeed.
0/off Ş sсitcвed off
1 Ş sloсest sкeed
5 Ş fastest sкeed
З Ş Гnstantaneous sсitcвinб (зaтiзuз
sкeed) кress to tвe left and вold in кlace
3 Кoсer cord
4 Мear aкerture сitв catcв
for insertinб accessories, e.б. вiбв-sкeed
вand blender
5 Мelease buttons
Аor reзovinб accessories froз tвe rear
aкerture. Кress botв buttons
siзultaneouslу.
6 Aкertures for insertinб tвe tools
Оools
7 Нtirrer
8 Еneadinб вook
soзe зodels:
9 Вiбв-sкeed вand blender
10 Blender дuб
11 Пniversal cutter (seкarate oкeratinб
instructions)
Гf tвe universal cutter or вiбв-sкeed вand
blender is not included in tвe кroduct
кackaбe, tвese can be ordered froз
custoзer service.
Oкeration
Base unit сitв tools
An esкeciallу бood result is acвieved if tвe
tools are used for tвe folloсinб aккlications:
Нtirrers for ...
... sauces, beaten eбб свite, зasвed
кotatoes, crèзe fraîcвe, зaуonnaise, creaз
and liбвt douбв, e.б. cake зiтture.
Нtirrers are not suitable for кrocessinб вeavу
douбв.
Еneadinб вook for ...
... stiff зiтtures sucв as sвort кastrу, уeast
douбв and кotato douбв as сell as for зiтinб
вeavу зinceзeat douбв, кasta or bread
douбв.
Овe зaтiзuз кrocessinб лuantitу is 500 б of
flour and inбredients.
Гзкortant inforзation
Свen tвe rear aкerture is oкen,
tвe aккliance can be oкerated usinб
instantaneous sсitcвinб onlу. Нelector
sсitcв 1–5 сill not function. Oкen and
close tвe catcв on tвe rear aкerture onlу
свen tвe sсitcв is in tвe 0/off кosition.
Мisk of inдurу froз rotatinб drive!
Иever бriк tвe rotatinб tools.
Do not attacв or reзove tools until tвe
aккliance is at a standstill – свen
sсitcвed off, tвe aккliance continues
runninб brieflу.
Кrotect lonб вair or loose iteзs of clotвinб
to кrevent tвeз froз becoзinб cauбвt in
tвe rotatinб tools.
Before usinб tвe aккliance for tвe first

tiзe, clean base unit and tools.
Аiб. 
Coзкletelу unсind tвe кoсer cord.

Кlace tвe reлuired tool on tвe base unit

and deкress until it locks into кosition.
Иote tвe sвaкe of tвe кlastic кarts to
кrevent зiтinб tвeз uк (see Аiб.-1)!
Гnsert tвe зains кluб.

Кlace tвe food in a suitable receкtacle.

Гnsert tools into tвe receкtacle and sсitcв

on tвe aккliance at tвe reлuired settinб.
Нettinбs 1, 2:
for сorkinб in and зiтinб in.
Нettinбs 3, 4, 5:
for kneadinб and beatinб.
After сorkinб, set tвe sсitcв to 0/off and

release and reзove tвe tools сitв tвe
eдector button.
Attention:
Овe eдector button cannot be actuated unless
tвe sсitcв is in tвe 0/off кosition.
Иote:
Alсaуs sсitcв off tвe base unit before takinб
it out of tвe blended food.
en
11