Siemens MQ965 Serie Gebrauchsanleitung Seite 10

en
Alсaуs disconnect tвe aккliance froз tвe suккlу if it is left unattended
and before asseзblinб, disasseзblinб or cleaninб.
Do not кlace tвe кoсer cord over sвarк edбes or вot surfaces.
Оo кrevent inдurу, a daзaбed кoсer cord зust be reкlaced bу tвe
зanufacturer or вis custoзer service or a siзilarlу лualified кerson.
Onlу our custoзer service зaу reкair tвe aккliance.
, Нafetу instructions for tвis aккliance
Мisk of inдurу
Electric sвock risk
Гf tвe кoсer is interruкted, tвe aккliance reзains sсitcвed on and
restarts свen tвe кoсer is restored. Нсitcв off tвe aккliance
iззediatelу.
Иever iззerse tвe base unit in liлuids and do not clean in tвe
disвсasвer. Do not use a steaз cleaner!
Do not iззerse tвe aккliance in liлuid above tвe дoint betсeen tвe
вiбв-sкeed вand blender and base unit.
Caution свen кrocessinб вot liлuids. Жiлuids зaу sкlasв durinб
кrocessinб.
Do not use tвe aккliance сitв daзк вands.
Мisk of inдurу froз rotatinб drive!
Иever бriк tвe rotatinб tools.
Do not attacв or reзove tools until tвe aккliance is at a standstill –
свen sсitcвed off, tвe aккliance continues runninб brieflу.
Кrotect lonб вair or loose iteзs of clotвinб to кrevent tвeз froз
becoзinб cauбвt in tвe rotatinб tools.
Гзкortant!
Do not oкerate tвe aккliance at no-load.
Oкerate tвe aккliance сitв oriбinal accessories onlу.
Гnsert tools of one tукe onlу (e.б. kneadinб вook).
Иever siзultaneouslу use tools and an accessorу inserted in tвe rear
aкerture.
Мecoззendation: Иever sсitcв on tвe aккliance for lonбer as уou
need to кrocessinб tвe inбredients.
Овe blender дuб is not suitable for use in tвe зicroсave.
10