Service Messages; Network Information - SAGEMCOM RCI88-320 Bedienungsanleitung

7.7.4 Service Messages

A Service Message is a text message that broadcasters or operators can send you.
The SERVICE MESSAGE menu lets you access all the messages you have been sent, both read and
unread.
1. Press the MENÜ
2. Select SETTINGS with
3. Select SERVICE with
right key.
4. Select SERVICE MESSAGES with
OK or the right
5. To browse through the list of your Service Messages, use
-
+
P and P .
6. To read a message, just select it and press OK
7. You can then keep the message (action Close) or delete it (action Delete).

7.7.5 Network Information

This menu provides information on the cable network, and lets you find out the signal level on different
channel frequencies.
1. Press the MENÜ
2. Select SETTINGS with
3. Select SERVICE with
right key.
4. Select NETWORK with
The following Network information is displayed:
• Last Network Scan: date of the last scan
• TV/Radio Channels: number of TV and Radio channels installed
• Signal level: shows, for each tuner, the signal quality of the current channel
• BER: shows, for each tuner, the Bit Error Rate of the current channel
• Network: cable network name
key.
or , and press OK
or , and press OK
or
key.
key.
or , and press OK
or , and press OK
or .
59
.
or the
, and press
.
.
or the