Audio Settings; Audio Output - SAGEMCOM RCI88-320 Bedienungsanleitung

7.2.2 Audio Settings

This menu lets you configure the following audio settings:
• Audio Output: You can set the audio output best fitted for your equipment: Stereo or Mono.
• Dolby Digital: You can enable/disable the automatic dolby digital output on the receiver's HDMI and
DIGITAL AUDIO (S/PDIF) outputs. Programs will be broadcast in Dolby Digital, provided it is
available.
Check the manual of your audio equipment to know what settings you need.
To access the audio settings:
1. Press the MENÜ
2. Select SETTINGS with
3. Select SYSTEM SETUP with
the right key.
4. Select AUDIO with
right key.

Audio Output

To set the default audio output:
1. Select AUDIO OUTPUT with
the right key.
2. Select the desired audio output, MONO or STEREO, with
or .
3. Press OK
Dolby Digital
To enable/disable Dolby Digital output on the receivers' HDMI
and/or DIGITAL AUDIO (S/PDIF) output:
1. Select DOLBY DIGITAL ON HDMI or DOLBY DIGITAL ON
SPDIF with
2. Select the desired state, ON (enable) or OFF (disable), with
or .
3. Press OK
key.
or , and press OK
or , and press OK
or , and press OK
or , and press OK
to confirm the new setting.
or , and press OK
to confirm the new setting.
.
or
or the
or
or the right key.
42