Selecting Subchannels - Sagemcom Rci88-320 Bedienungsanleitung

4.3.3 Selecting subchannels

1. Press the OPT
2. Select VIDEO SUBCHANNEL with
OK or the right
3. Select the desired subchannel with
press OK .
Note
If you want to record a specific subchannel, select it from the options banner
then start recording by pressing the REC
If you switch channel during the recording, the receiver will not retain the
selection of the subchannel but will record instead the main channel.
key to display the options banner.
or
key.
24
, and press
or , and
key.