Picture Settings - SAGEMCOM RCI88-320 Bedienungsanleitung

7.2.3 Picture Settings

This menu lets you configure the following picture settings:
• SCART settings (TV, VCR)
• AV/SCART-Switching
• HDMI Screen Resolution
• Banner Timeout
• On-Screen Display Transparency
• Start Channel
To access the receiver picture settings:
1. Press the MENÜ
2. Select SETTINGS with
3. Select SYSTEM SETUP with
the right key.
4. Select PICTURE with
right key.
TV SCART Settings
This menu lets you set the video standard for TV output best
suited for the TV set connected on the TV SCART.
1. Select TV SCART with
right key.
2. Select the video standard best suited for the TV SCART
output, RGB, FBAS/CVBS or SVIDEO, with
3. Press OK
VCR SCART Settings
This menu lets you set the video standard for VCR output best
suited for the recording equipment connected on the VCR
SCART.
1. Select VCR SCART with
right key.
2. Select the video standard best suited for the VCR SCART
output, FBAS/CVBS or SVIDEO, with
3. Press OK
key.
or , and press OK
or , and press OK
or , and press OK
or , and press OK
to confirm the new setting.
or , and press OK
to confirm the new setting.
.
or
or the
or the
or .
or the
or .
43