Automatic Channel Scan - SAGEMCOM RCI88-320 Bedienungsanleitung

7.1.4 Automatic Channel Scan

You can manually start a channel scan if needed. This feature will be particularly helpful if you refused the
automatic installation of new channels that you eventually want to perform.
To start an automatic channel scan:
1. Press the MENÜ
2. Select SETTINGS with
3. Select SYSTEM UPDATE with
or the right
4. Select AUTOMATIC CHANNEL SCAN with
press OK .
5. The receiver searches for new TV and Radio channels and
displays the number of channels found.
You can cancel the scanning before its completion by
pressing ZURÜCK
6. Once the search is complete, press OK
channels.
7.1.5 Search for Additional Channels
This menu lets you manually search for channels by entering a specific frequency.
To launch a manual channel scan:
1. Press the MENÜ
2. Select SETTINGS with
3. Select SYSTEM UPDATE with
or the right
4. Select SEARCH FOR ADDITIONAL CHANNELS with
, and press OK
5. Enter the desired frequency using the numeric keys on the
remote control.
6. Select SEARCH with OK
7. The receiver searches for TV and Radio channels and displays the number of channels found.
You can cancel the scanning before its completion by pressing ZURÜCK
8. Once the search is complete, press OK
key.
or , and press OK
or
key.
or the left
key.
or , and press OK
or
key.
or the right key.
.
.
, and press OK
or , and
key.
to save the new
.
, and press OK
or
to save the new channels.
39
or the left key.