To Clean The Spray Arms; To Clean The External Surfaces - AEG Electrolux FAVORIT EXPRESS Benutzerinformation

20
Care and cleaning
1. coarse filter (A)
2. microfilter (B)
3. flat filter (C)
1. To unlock the filter system, turn the han-
dle on the microfilter (B) approximately
1/4 counterclockwise.
2. Remove the filter system.
3. Hold the coarse filter (A) by the handle
with the hole.
4. Remove the coarse filter (A) from the
microfilter (B).
5. Remove the flat filter (C) from the bot-
tom of the appliance.
6. Clean the filters below running water.
7. Put the flat filter (C) in the bottom of the
appliance.
8. Put the coarse filter (A) in the microfilter
(B) and push the filters together.
9. Put the filter system in position.
10. To lock the filter system, turn the handle
on the microfilter (B) clockwise until it
locks in position.

To clean the spray arms

Do not remove the spray arms.
If the holes in the spray arms become clogged, remove remaining parts of soil with a cocktail
stick.

To clean the external surfaces

Clean the external surfaces of the appliance and control panel with a damp soft cloth. Only
use neutral detergents. Do not use abrasive products, scouring pads or solvents (e.g. ace-
tone).
A
B
C