Instructions For The Installer; Technical Data; Installing The Appliance; Transportation, Unpacking - Electrolux ERT 16002 W8 Benutzerinformation

58 electrolux

Technical data

Model
Gross capacity (l)
Net capacity (l)
Width (mm)
Height (mm)
Depth (mm)
Energy consumption
Energy class, according to EU
standards
Rated current (A)
Weight (kg)

Installing the appliance

Transportation, unpacking

It is recommended to deliver the
appliance in original packaging, in
vertical position
protective warning on packaging.
After each transportation the appliance
must not be switched on for approx. 2
hours.
Unpack the appliance and check if there
are damages on it. Report possible
damages immediately to the place you
bought it. In that case retain packaging.
GB

Instructions for the Installer

(kWh/24h)
(kWh/year)
considering
ERT16002 W8
Fresh food comp.: 155
Fresh food comp.: 152
550
850
612
0,326
119
A+
0,5
33

Cleaning

Remove every adhesive tape, which
ensure the parts not to move in the
the
appliance.
Wash the inside of the appliance using
lukewarm water and mild detergent. Use
soft cloth.
After cleaning wipe out the inside of the
appliance.

Placement

The ambient temperature has an effect
on the energy consumption and proper
operation of the appliance. When
placing, take into consideration that it is
practical to operate the appliance
between ambient temperature limits
according to the climate class that is
given in the chart below and can be
found in the data label.