Electrolux ERES38810W Benutzerinformation Seite 18

18 electrolux
6. Remove cloth or towel and make sure
that spilled water is wiped off.
7. Close the hatch and remount the interior.
8. Keep the bypass cartridge for future use.
9. Unlock the water dispenser. Refer to
"Child lock functions". Select plain water
and dispense about 2 litres of water.
There may be some air to start with.
Installation of the gas cylinder
1. Remove the gas cylinder wrapping and
screw on the adapter to the gas cylinder.
Tighten by hand only.
2. Position the gas cylinder with the adapter
attached underneath the valve and en-
sure that the hooks of the lever system
supports the protruding parts of the
adapter.
3. Then turn the lever upwards in one con-
tinuous movement.
4. Unlock the water dispenser, refer to "Wa-
ter dispenser functions". Choose carbo-
nated water and dispense further 1,5 li-
tres (2,5 pints) of water.
5. The system is now ready for use. In order
to obtain the best possible performance
from the refrigerator, wait untill the set
temperature is reached.
Door reversibility
It is not possible to change the opening di-
rection of the door.
2
1