Electrolux ERES38810W Benutzerinformation Seite 17

Installation of the Taste Guard filter
The Taste Guard filter is an active carbon filter
which absorbs bad odours maintain the best
flavour and aroma for all foodstuffs without
risk of odour cross contamination.
On delivery the carbon filter is in a plastic bag
to preserve performance.
1. Open the air lever flap.
2. Take the filter out of the plastic bag.
3. Insert the filter in the slot found in the back
of the air lever flap.
4. Close the air lever flap.
Important! The filter should be handled
carefully so fragments do not loosen from the
surface.
Make sure that the air lever flap is closed to
obtain proper function.
Starting the water system for the first
time.
Ensure proper connection to the water sup-
ply, refer to "Connecting the water hose".
1. Open the tap on the water connection.
2. Start the refrigerator (switch off and re-
start if it is already running).
The water system main valve opens and the
pump starts to fill the system.
Installation of the water filter
Unpack the filter.
1. Remove the accessories in front of the
water module and open the service
hatch.
2. Place a cloth or a piece of kitchen towel
in the space beneath the water filter.
3. Pull the bypass cartridge outwards,
grasping the lower part, until the water
bypass cartridge is automatically ejected.
4. Remove the protective wrapping of the
new water filter and insert the new filter
firmly into the filter connection.
5. Push the water filter back to its original
position.
electrolux 17