Datalogic Magellan 2300HS Anleitung Seite 10

Green LED Indicator
The green LED (
Table 2. Green LED Indications
LED
INDICATION
a
Scanner Active
Scanner (Green) LED on steady and dim
(Normal Mode)
Good Read Indi-
Scanner (Green) LED - bright flash
a
cation
Scanner (Green) LED - Continuous flash-
Program Mode
ing
Indication
Sleep Mode Indi- Scanner (Green) LED flashes slowly
cation
Scanner (Green) LED 1-second off, 1/10-
second on
Host Disabled
Audible low tone 1 second. LED flashes
Field Replace-
continuously.
able Unit (FRU)
Warning (Error
Mode)
Scanner (Green) LED flashes a coded
sequence in concert with the speaker.
FRU Indication
a. Certain functions of the LED are selectable to be enabled or disabled. Your scanner may not be pro-
grammed to display all indications.
4
d) indicates scanner status as shown in the table below.
Figure 2
DURATION COMMENT
The scanner is ready for operation. Scanning is immedi-
ately available.
Indicates a bar code has been read and decoded.
Indicates the scanner is in Label Programming Mode.
Cycle power to exit Programming Mode.
The scanner motor and/or laser have automatically
switched off and the unit has entered Sleep Mode due
to extended inactivity.
Host has disabled scanning.
Serves notice that a fatal FRU failure has been
detected. Call systems support for service.
Occurs ONLY upon Volume/Tone button push following
a FRU warning. Enables service technicians to identify
FRU failures.
TM
Magellan 2300HS