Medion MD 87007 Bedienungsanleitung Seite 99

6.4.3. Time-lapse function
Set the time-lapse function here for taking photos.
If the time-lapse function has been activated, the
camera will continue to take photos at a set time
interval until either the memory is full, the battery is
empty or the process is manually ended.
The available time-lapse settings for taking photos are:
OFF, 15 SEC., 30 SEC. and 1 MIN..
 If you do not want to use the time-lapse function,
set the function to AUS. The shutter release on
the camera will now be triggered when the motion
sensor registers movement.
NOTE
If the time-lapse function has been
activated, the camera will take photos at
set time intervals irrespective of the motion
sensor.
6.4.4. Info Stamp
If the info line function has been activated, the date
and time at which the photo was taken and other
information about the photo will be added to the
photos. The data is superimposed when playing back
the photos.
98 of 230