Displaying Total Number Of Copies - Sharp AR-122E N Bedienungsanleitung

Program
No.
1 Auto clear time
2 Preheat mode
Auto power shut- off
3
timer
Stream feeding
4
mode
Auto power shut- off
5
mode
Resolution of AUTO
6
& MANUAL mode
* Factory default settings are indicated with an asterisk (*).
Program No. 4 can be selected when your unit has the SPF.
5
Press the start (
will be steadily lit and the entered value will be stored.
To change the setting or to set another mode, press the clear
(
6
Press the light (
copy mode.

DISPLAYING TOTAL NUMBER OF COPIES

Use the following procedure to display the total number of copies.
1
Press and hold down the clear (
seconds. The total number of copies will appear in two steps, each
with three digits.
Example: Total number of copies is 1,234.
Mode
0
*3
*0
0
3
0
0
*0
) key. The right-hand number in the display
) key. The unit will return to step 2.
) or dark (
Parameters
OFF, 1 10sec., 2
60sec., 4 90sec., 5
30sec., 1 60sec., 2
2min., *1 5min., 2
30min., 4 60 min., 5
OFF, *1 ON
OFF, *1 ON
300dpi, 1 600dpi
) key to return to the normal
) key for approximately 5
30sec.
120sec.
90sec.
15min.,
120min.
4
23