Special Functions; Description Of Special Functions; Toner Save Mode - Sharp AR-122E N Bedienungsanleitung

4
This chapter describes the special functions of this unit. Use these functions as
needed.

DESCRIPTION OF SPECIAL FUNCTIONS

Toner save mode (page 21)
Reduces toner consumption by approximately 10%.
Power save modes (page 22)
The unit has two power save modes of operation: preheat mode and auto power
shut-off mode.
Preheat mode
When the unit enters the preheat mode, the power save (
and other indicators will remain on or off as before. In this condition, the fuser in
the unit is maintained at a lower heat level, thereby saving power. To copy from
the preheat mode, make desired copier selections and press the start (
using the normal copying procedure.
Auto power shut-off mode
When the unit enters the auto power shut-off mode, the power save (
will light up and other indicators will go out. The auto power shut-off mode saves
more power than the preheat mode but requires a longer time before starting
copying. To copy from the auto power shut-off mode, press the start (
Then make desired copier selections and press the start (
normal copying procedure.
Auto clear (page 22)
The unit returns to the initial settings a preset amount of time after the end of copy, or
scanner job. This preset amount of time (auto clear time) can be changed.
Resolution of AUTO & MANUAL mode (page 22)
You can set the copy resolution used for AUTO and MANUAL (
mode.

TONER SAVE MODE

1
Press the exposure mode selector key
to select the MANUAL (

SPECIAL FUNCTIONS

) indicator will light up
) mode.
) key
) indicator
) key.
) key using the
) exposure
4
21