JVC KD-R701 Bedienungsanleitung Seite 38

Symptoms
• Noise is generated.
• "READING" keeps flashing on the display. • Readout time varies depending on the USB device.
• "NO FILE" appears on the display.
• Tracks/folders are not played back in the
order you have intended.
• "CANNOT PLAY" appears on the display.
• "NO USB" appears on the display.
• The unit cannot detect the USB device.
• "NOT SUPPORT" appears on the display
and track skips.
• Correct characters are not displayed (e.g.
album name).
• While playing a track, sound is
sometimes interrupted.
• Bluetooth device does not detect the
unit.
• The unit does not detect the Bluetooth
device.
*
2 Folder that is physically empty or folder that contains data but does not contain valid MP3/WMA track.
*
3 For Bluetooth operations, refer also to the instructions supplied with the Bluetooth Adapter.
38
Remedies/Causes
The track played back is not an MP3/WMA track. Skip to
another file. (Do not add the extension code <.mp3> or
<.wma> to non-MP3 or WMA tracks.)
• Do not use too many hierarchy or folders.
• Turn off the power then on again.
• Do not pull out or connect the USB device repeatedly
while "READING" is displayed on the display.
Selected folder is an empty folder *
that contains MP3/WMA tracks.
The playback order is determined by the write-in time
stamp. The first track/folder written into the USB device
will be the first track/folder for playback.
• Connect a USB device that contains tracks encoded in an
appropriate format.
• Connect the USB device again.
Check whether the track is a playable file format.
This unit can only display alphabets (upper case),
numbers, and a limited number of symbols.
The tracks have not been properly copied into the USB
device.
Copy tracks again into the USB device, and try again.
The unit can be connected with one Bluetooth cellular
phone and one Bluetooth audio device at a time.
While connecting a device, this unit cannot be detected
from another device. Disconnect currently connected
device and search again.
• Check the Bluetooth setting of the device.
• Search from the Bluetooth device. After the device
detects the unit, select "OPEN" on the unit to connect
the device. (See page 15.)
2 . Select another folder