Important Notice - Vevor Jg-32 Originalanleitung

down.
2.Hold the upper gland with both hands, slide it smoothly and upward from
the guide rod, and remove the upper gland. Then, unscrew 2 push block
hand screws, remove the food push block, replace the push block with the
required specification, and tighten the hand screws.
3.The vibration-damping pad on the guide rod was removed, and the blade
plate was removed from the guide rod. 4. Prepare the required blade plate,
and in the same way, successively install the blade plate and pressure
head (note: the blade mouth is facing upwards). 5. After the completion of
the replacement, try to press it first to check whether there is a
blade-banging phenomenon and whether the specification of the blade set
is consistent.
Warning-To reduce the risk of injury, user must read
instructions manual carefully.
IMPORTANT NOTICE: Read this manual carefully
before use!!
This manual is considered to be part of the device and will be provided to
hotel or restaurant owners or managers and responsible persons to train
operators of the device, read the precautions carefully before use and
- 3 -