Medion MD 21449 Bedienungsanleitung Seite 91

Menu Item
SCAN TYPE
(only in DVB-C mode)
NETWORK ID
(only in DVB-C mode)
FREQUENCY
(only in DVB-C mode)
SYMBOL RATE
(only in DVB-C mode)
SORTING BY LCN
 After you have made all the settings, press OK. The channel search will then
start.
4.8.2. Satellite
Menu Item
TUNE TYPE
DIGITAL TYPE
SATELLITE
90
Set the search mode. Leave the setting on NET-
WORK SCAN or FULL if you do not want to
make any special settings.
Set the network ID. The default setting is AUTO.
Set the frequency. The default setting is AUTO.
Only active if the option NETWORK SCAN has
been selected in search mode.
Set the symbol rate.
Logical Channel Numbering: Select the setting
ON if you want to order the channels based on a
preset channel list (if available from the channel
supplier)
Tuning Setup
Tune Type
Digital Type
Satellite
Scan Type
Channel Type
Service Type
Load Presetlist
Dish Setup
Back
MENU
No settings can be entered here in satellite mode.
Use the direction buttons to select the digital con-
nection type (DVB-T, DVB-C or SATELLITE).
Select the satellite via which the search will be
started.
Setting
DTV
Satellite
01 HOTBIRD 6,7A,8
Default
Free+Scrambled
All
OK
OK
Start
OK
Setting