Medion MD 21449 Bedienungsanleitung Seite 104

SIGNAL
INFORMATION
DELETE
Select the channel that you want to delete and press the
red button [PROGRAM]. The marked channel is then
deleted.
DVB-T/C: If the SORTING BY LCN function has been
activated, the channel number will also be deleted when
the channel is deleted. In order to avoid this happening,
deactivate this function under AUTO TUNING.
RENAME (only for ATV)
Select the channel that you want to rename and press
the green button [INTRO].
You can now change the first letter: scroll up and down
through the set of characters using the direction buttons
.
Move to the next and subsequent letters using the direc-
tion button .
When finished, press the green button [INTRO] again to
save the name.
MOVE
Select the channel and press the yellow button [RE-
PEAT]. Use the  buttons to move the channel to the
desired position and press the yellow button [REPEAT]
again. The other channels will be rearranged according-
ly. Alternatively, you can use the number buttons on the
remote control to enter the channel number to which
the channel should be moved. Then press the OK but-
ton. The channel will then be moved to the desired chan-
nel number.
SKIP
Select the channel that you want to skip when scrolling
through the channels using the P+/-buttons and then
press the blue button [A-B].
You can still select this channel via the number buttons.
FAV
In order to save a channel to the favourites list, mark it
and press the FAV button. You can call up the favourites
list via the buttons on the remote control.
The signal information about the currently set channel
will be displayed here.
This option is only available in DTV mode.
DE
EN
103