Medion MD 21449 Bedienungsanleitung Seite 108

Menu Item
TRAN-
SPONDER
LNB TYPE
Setting
Use the arrow button EPG to switch to the
TRANSPONDER column and use the arrow
buttons  to select the transponder for which
you want to start the search. Now press the OK
button to mark the relevant transponder with a
red tick.
ADD
Press the yellow button to add a new transpond-
er. Enter the required value and confirm with OK
or press EXIT to cancel the process.
FRE-
Enter the frequency using the num-
QUEN-
ber buttons.
CY
SYMBOL
Enter the symbol rate using the
(KS/S)
number buttons.
POLAR-
Select the polarity with .
ITY
DELETE
Select the transponder that you want to delete
from the list as described above and press the red
button. Confirm the query with YES.
EDIT
The setting options correspond to those for
ADD.
SCAN
The setting options correspond to those for
SCAN under satellite.
Enter the oscillator frequency for your LNB type
here. The default setting is 09750/10600.
The following UNICABLE SETTINGS can be
made here.
IF
CHAN- You can set the IF channel here
NEL
CENTRE You can set the centre frequency
FREQ
here
SAT PO- You can set the satellite position
SITION
here
DE
EN
107