VEVOR LD-BP30-3R Originalanleitung Seite 4

during assembly, operation and cleaning.
3.Do not touch moving or pressing parts while the press is in operation.
4.Use only for its intended purpose: pressing fruit for wine, juice or cider.
Do not use for any other purpose.
5.Do not use the press if it is damaged, broken, or has missing parts.
Contact the manufacturer for replacement parts.
6.Do not leave the press unattended during use. Keep children and pets
away from the equipment at all times.
7.Follow all cleaning and maintenance instructions. Ensure all parts are
properly assembled before use.
8.Food contact surfaces comply with food safety regulations. Clean
thoroughly before first use and after each use.
9.Keep the working area clean and dry to avoid slipping or press
movement!
10.Hard fruits must be crushed before pressing.
11.Secure the legs to the floor before pressing,if required,to prevent it from
moving.
12.Do not reach into the press with your hand while you start pressing.
13.Wash the parts with warm water after pressing and allow them to dry
completely before storing the press in a dry well-ventilated place.
14. If it is not usedfor a long period of time,grease the spindle with edible
oil.
15. The edible oil on the spindle can be removed with common cleaning
agents.
16. Common rust removers can remove the rust from the metal surface if
the press gets
rusty.
17. The wrench for the spindle nut M16 and the cross screwdriver for the
fixing screws
are not included in the delivery.
COMPLIANCE STATEMENTS
This manual fruit wine press complies with the EU General Product Safety
- 3 -