Fermax VDS Handbuch Seite 35

VDS - B VDS - B VDS - B VDS - B US2 US2 US2 US2
VDS - B VDS - BUS2 VDS - B VDS - B VDS - BUS2 VDS - B US2 US2 US2 US2
Programming sequence of call code must be done as described in the diagram and
only can be made in panels with Display. Detailed information in this manual.
After programming the call code of the user, to make a call :
a.) Enter the ADS line number: '42 '.
b.) Enter the call code: '503 '.
c.) Search the user and press the ' ' key.
VERY IMPORTANT REMARKS:
Calling using b) or c) can only be made if the user has been added to user list.
Digital directory searches first the codes stored in the user list, so consider
the following points:
If the user is not added to user list, call can only be made entering: '42+ '
On entering a call code not previously added to user list a call will be made to the
ADS line that matches this code.
It will be unable to make a call to an apartment terminal not added to the user list
if another user is added with a call code matching with the ADS line of the first one.
Pag 35