Fermax VDS Handbuch Seite 30

VDS - B VDS - B VDS - B VDS - B US2 US2 US2 US2
VDS - BUS2 VDS - B VDS - B VDS - B VDS - BUS2 VDS - B US2 US2 US2 US2
(tB) B time
B t i m e ( 0 - 9 9 )
0 6
B t i m e ( 0 - 9 9 )
0 6
Reset system
RESET system
to update values
VDS/B-2 V2.0
Sending...
Pag 30
'B time' defines electric lock activation activation from the panel:
by pressing the open button (indoor).
Allowed values are defined between 1 and 99 seconds.
Confirm entered value pressing 'B' key.
B
Finally, system ends sequence asking for a hardware reset to
enable new parameters. Turn off the power to end sequence.
After re-powering up the system, the display will notice the
synchronization process with the amplifier (device that makes
electric lock activations): 'Sending..."