Fermax VDS Handbuch Seite 26

VDS - B VDS - B VDS - B VDS - B US2 US2 US2 US2
VDS - BUS2 VDS - B VDS - B VDS - B VDS - B VDS - BUS2 US2 US2 US2 US2
Main menu
Programming Menu
M 1 2 3 4
p Us Pa Ut Ti
User menu
1
U 1 2 3 4 5
s + - M T R C O
(+) ADDING USERS
Every user record has six information fields to fill:
1
Name
_
Line 2
_
Line 2? (A=Yes)
Call Code
0000
Telephone Code
000
Opening Code
_ _ _ _ _ _
Opening Code
_ _ _ _ _ _ N0001
On button key or proximity reader devices, the reader must be connected to the ADS Digital
Directory. To store the code, the desired ID device must be used with its proper reader
when system asks for the opening code.
Pag 26
Users, parameters, utilities and times menu are available.
The user level allows adding and modifying users. User level
6 7
can also display the number of users stored in memory.
System administrator level allows erasing users and compacting
and sorting list operations.
- Name (16 chars length): this field will be shown in the first line of
the LCD display. Enter the '*' character to hide this field in the
display (only in current record).
- Line 2 (16 chars length): shown in the second line of the LCD
display. It should be used to show additional information (i.e. a
second user with the same record ).
- Line 2?: dialling 'A' information stored in line 2 field will be
displayed. Dial 'B' to hide this info (system will only show the
information about house number).
- Call code: code (0001 to 9999) to be dialled by visitor to make a
call to this user. Call codes can not be repeated. Dial 'A' to modify
entered data or 'B' to accept and continue.
- Telephone code: matches with the house terminal code (every
terminal must be programmed with the terminal code (address)),
detailed info in the installation section of this document. Accept
dialling 'B' and modify dialling 'A'.
- Opening code: enter the opening code of this resident. Press 'A'
to modify and 'B' to accept.