Qwic RD10 Bedienungsanleitung Seite 76

Seatpost suspension
The Performance RD10 Speed is equipped with seatpost
suspension. It is possible to fine adjust the spring load.
First loosen the seat clamp and take the seatpost out
of the frame. You can find a silver bus on the bottom
side of the seatpost that can be rotated inward or
outward in the black outer tube. Use an Allen key and
rotate clockwise to tighten the suspension and rotate
counterclockwise to loosen the suspension.
Attention! Please make sure that the silver bus
! never protrudes from the black outer tube. If
the silver bus is loosened too far, it can break
loose under the pressure from the spring.
76
Adjustable stem
De stem on the Performance RD10 Speed is adjustable
in height. Loosen the two indicated Allen bolts on the
side of the stem. The stem has 90 degree adjustability.
If the stem is in the desired position, fasten the two
Allen bolts again with the indicated torque of 14-15
Nm.
The handlebar can be rotated to the desired position as
well. Use the general instructions indicated on page 78.
Speed pedelec onderdelen