Qwic RD10 Bedienungsanleitung Seite 66

Removing and mounting the battery from the frame
The Performance series are equipped with an
integrated frame battery.
Removing the battery
Disconnecting and removing the battery starts with
unlocking the battery. The lock is situated on the left
side of the bicycle at the top of the battery. To unlock,
first grasp the aluminium handle on the battery firmly.
Insert the designated battery key in the lock, turn it
counterclockwise and hold it there to open the lock.
Now pull the battery toward you on the left side.
You will notice the battery pivots toward you. In this
position you can pull the battery out of the bicycle
frame.
The battery may require a small amount of
force to remove the battery from the frame.
!
Hold the battery firmly when removing it, to
make sure the battery does not slip from your
hands when it suddenly comes loose.
Remove the key after placing the battery,
!
because of possible loss and/or theft of the key,
the battery, and the bike.
66
Battery & Charging