Qwic RD10 Bedienungsanleitung Seite 51

MODE RPM TRIP TIME
E RPM TRIP TIME ODO
NGE BATTERY MODE RPM TRIP TIME ODO MAX
M TRIP TIME ODO MAX
TERY MODE RPM TRIP TIME ODO MAX
P TIME ODO MAX
MI
KM
DE RPM TRIP TIME ODO MAX
VEL
ENU
ROR
MI
KM
TRIP TIME ODO MAX
Ah
VWh
MPH
MI
KM/H
KM
Ah
VWh
MPH
KM/H
Ah
VWh
MPH
KM/H
Trip distance
ODO MAX
Distance travelled since last reset
Timer
MAX
Effective time travelled since last start-up
Total distance
Total distance travelled by bicycle (Odometer)
MI
KM
Maximum speed
Indicates the maximum speed driven since the
last reset.
Ah
VWh
MPH
KM/H
Controls
Switching On and Off
Press the 'ON/OFF' button for 2 seconds to turn the
system on and off. The control panel can only be used
when the battery is connected to the bike. If the system
is not used for 5 minutes it will shut itself down.
Display option field
Press shortly on 'SET' to choose between the different
display states offered in the option field.
Adjusting the pedal assistance
Use the 'PLUS' and 'MINUS' buttons to select the
assistance levels. The higher the power level, the
stronger the motor assistance. In power level 0 the
motor gives no assistance but you can use the display of
the bike. Please note that the battery runs out of power
faster when using a high power level than with a low
power level. The highest 2 levels are very powerful and
only meant for hills, slopes and tough circumstances.
Display & Controls: Rearmotor models
51