Rearwash - Duravit Sensowash D-Code Bedienungsanleitung

The water in the tank is not heated until the seat sensor is activated. The seat
is not heated either until the seat sensor is activated.
7.2

Rearwash

> Press the "Rearwash" button <
The spray wand moves out and sprays a water jet for about one minute. This func-
tion is then stopped automatically.
> Press the "Stop" button <
All of the functions that are currently active will be terminated.
After the "Rearwash" function has stopped, the spray wand is cleaned auto-
matically for about three seconds. The spray wand retracts during this time and is
flushed all-round with water.
If the "Rearwash" button is pressed <
cleaning continues for another minute.
During the cleaning process the water temperature and water pressure (see 8.5 -
8.8) can be adjusted to suit the user's personal preferences.
If the seat sensor does not detect any user on the seat, then the SensoWash
will not function.
> on the control panel.
4
5 > on the control panel.
> once again during the cleaning process,
4
EN
D-Code
®
41