Ambient Conditions - Duravit Sensowash D-Code Bedienungsanleitung

The SensoWash D-Code is not intended for use by people (including children) with
®
limited physical, sensory or mental capabilities, or those without the necessary ex-
perience or knowledge, except when supervised by a person responsible for their
safety, or when they have received instructions from said person about how to use
the SensoWash D-Code.
®
Children must be supervised to ensure that they do not play with the
SensoWash D-Code.
®

3.2 Ambient conditions

When the SensoWash D-Code is brought from a cold location to a warm one, conden-
®
sation may form. Leave the unit switched off for a few hours.
The SensoWash D-Code may not be installed in rooms where there is a danger of
®
frost. The room temperature must not be less than 4°C.
Do not expose the unit directly to water. Do not set or place open fire sources, can-
dles, cigarettes or the like on the SensoWash D-Code.
®
Use an earthed 220-240V, 50Hz electrical socket. We recommend the installation of
a residual-current device (RCD).
34