Function And Location Of The Controls - Midland ALAN 42 MULTI Handbuch

FUNCTION AND LOCATION OF THE CONTROLS

21
CHANNEL
22
18
6
23
1. Antenna connector: insert into this plug the antenna supplied with the radio. It is
possible to use external vehicular antennas to obtain a better performance.
2. Squelch Control: this control cancels the background noise of the receiver. By
turning the knob to the right the function is activated, by turning the knob to the
left the function is deactivated. The knob should be regulated exactly at the point
where the receiver background noise disappears.
3. On/Off Volume Control.
In ''off'' position your transceiver is off. Turn this control clockwise to switch on
the unit. Turn the knob clockwise a little more to set the audio level, until you get a
comfortable reception.
4. MIC jack: connect by inserting the loudspeaker mike to the plug.
5. External loudspeaker jack: connect by inserting the loudspeaker mike to the
plug.
6. Belt clip
DW
15
SC
16
LCR LCD
EMG
17 A/F
MIC
CHANNEL
Q.UP
8
9
2 2
7
20
10
12
LOCK
H/L
13
Q DOWN
11
14
13
1 2 3
SQL OFF/VOL
SPK
MIC
4 5