Installation; Installation Instaructions And Door Reversibility - Telefunken Tfevks123X10A++ Bedienungsanleitung

2. INSTALLATION

2.1. Installation instaructions and door
reversibility
Before installation, read the instructions
carefully.
Fit the refrigerator/ in stable kitchen units
only.
If necessary, reverse the door according to
instructions.
1. See g.A for the necessary attachment
components.
2. Insert trim ap into slot and screw by
1
screws 6 . (g.D)
3. Pass the power cord through ventilation
shaft and position it so that the appliance
could be easily plugged in once it has
been installed. (g.B - g.C)
4. Take out the trim gasket
side panel of the appliance and stick it
on reverse side of the door hinges of the
appliance. (g.D - g.E)
5. Raise the appliance and slide into the
kitchen unit.
6. Push the appliance to the reverse side
of the door hinges providing that the trim
gasket covers the space between the
2
appliance and the kitchen unit.
7. Align the front feet with front surface of
the kitchen unit. (g.F)
8. Screw the front feet by using screws
(g.F)
9. Screw trim ap 1
5
screws . (g.G)
3
10. Screw guides
screws . (g.H)
6
11. Lean appliance door to unit door as it is
opened at right angle.
4
12. Slide rails into guides
groove. (g.H)
13. Screw the rails
4
screws . (g.H)
5
14. Set 1~2 mm gap on handle side
between unit itself and unit door by
located on the
4
to kitchen unit using
to appliance door with
3
aligning the
to the unit door with
adjusting guides
appliance performance. (g.H)
5 .
EN - 20
. That is vital for
3