Error Codes And Flashing Sequences - HomeMatic basic Anleitung

be reached in isolated instances during start-up or initial installation of
a system. If the duty cycle is exceeded, this is indicated by one long red
lighting of the system LED (C), and may manifest itself in the device tem-
porarily working incorrectly. The device starts working correctly again af-
ter a short period (max. 1 hour).
8.4

Error codes and flashing sequences

Flashing code
Short orange
flashing
1x long green
lighting
1x long red
lighting
Short orange
flashing (every
10 s)
Short orange
lighting (after
green or red
confirmation)
6x long red
flashing
1x orange and 1 x
green lighting
Meaning
Radio transmission/at-
tempting to transmit/
data transmission
Transmission
confirmed
Transmission failed
or duty cycle limit is
reached
Teach-in mode active Please enter the last four
Batteries empty
Device defective
Test display/
system start
Solution
Wait until the transmission is
completed.
You can continue operation.
Please try again (see sec.
„8.2 Command not con-
firmed" on page 30 or
„8.3 Duty cycle" on page
30).
numbers of the device serial
number to confirm (see „6
Teaching-in" on page 27).
Replace the batteries of the
device (see „7 Replacing
batteries" on page 28).
Please see your app for er-
ror message or contact your
retailer.
Once the test display has
stopped, you can continue.
Troubleshooting
31