Transport, Storage And Disposal; Venting The Appliance; Transporting The Appliance - Melitta CI touch Bedienungsanleitung

Transport, storage and disposal

Requirement:
ū The ready symbol appears on the
display.
ū The collecting vessel (0.7 l) is under the
spout.
1. Press the "Rotary switch" for 2 seconds.
» The menu appears on the display.
2. Navigate to the Care > Filter > Change
filter menu.
3. Select Start and confirm your selection.
4. Follow the further instructions on the
display.
Removing the water filter
The water filter should not be left standing
dry for a long period of time. When it is
not used for a long time, we recommend
storing the water filter in a vessel filled
with tap water in the refrigerator.
Requirement: The ready symbol appears
on the display.
1. Press the "Rotary switch" for 2 seconds.
» The menu appears on the display.
2. Navigate to the Care > Filter > Remove
filter menu.
3. Select Start and confirm your selection.
4. Follow the further instructions on the
display.
» The water hardness is automatically
reset to the previous setting.
» The ready symbol appears on the
display.
10 Transport, storage and
disposal

10.1 Venting the appliance

We recommend venting the appliance
when it is not used for a long period, prior
to transport and when there is a risk of
frost.
During venting, residual water is removed
from the appliance.
50
Requirements:
ū The water filter is removed.
ū The ready symbol appears on the
display.
1. Place a vessel beneath the spout.
2. Press the "Rotary switch" for 2 seconds.
» The menu appears on the display.
3. Navigate to the System > Venting menu.
4. Select Start and confirm your selection.
5. Follow the further instructions on the
display.
» The appliance heats up.
» The appliance is vented and switches
off completely.

10.2 Transporting the appliance

ATTENTION
Freezing residual water can damage the
appliance.
Prevent the appliance from being
ƒ
exposed to temperatures below 0 °C.
Information
Transport the appliance in the original
packaging. This avoids damage in transit.
Before transporting the appliance, carry
out the following activities:
1. Vent the appliance (see chapter 10.1,
page 50).
2. Empty the drip tray and the coffee
grounds container.
3. Empty the water tank.
4. Empty the bean container.
5. Clean the appliance (see chapter 9.1,
page 45).
6. Secure loose parts (cup plate, etc.) with
suitable adhesive tape.
7. Package the appliance.